Labels for Hand Writing

Tough-Tags are the pre-cut, peel-off, chemically inert labels which are sized to fit microcentrifuge tubes and other laboratory containers. Tough-Tags strongly adhere to all plastics and are designed to withstand steam-autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling or falling off. Tough-Tags are easy to use, simply mark the label with any writing instrument and press it onto the tube or container. The labels will not fall of even after shaking or vortexing. The labels are thin enough to slide easily in and out of centrifuge rotors without binding.
Supplied on a roll.

Tough-Tags are the pre-cut, peel-off, chemically inert labels which are sized to fit microcentrifuge tubes and other laboratory containers. Tough-Tags strongly adhere to all plastics and are designed to withstand steam-autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling or falling off. Tough-Tags are easy to use, simply mark the label with any writing instrument and press it onto the tube or container. The labels will not fall of even after shaking or vortexing. The labels are thin enough to slide easily in and out of centrifuge rotors without binding.
Supplied on a roll.

Tough-Tags are the pre-cut, peel-off, chemically inert labels which are sized to fit microcentrifuge tubes and other laboratory containers. Tough-Tags strongly adhere to all plastics and are designed to withstand steam-autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling or falling off. Tough-Tags are easy to use, simply mark the label with any writing instrument and press it onto the tube or container. The labels will not fall of even after shaking or vortexing. The labels are thin enough to slide easily in and out of centrifuge rotors without binding.
Supplied on a roll.

Choice of colours, select from drop down list.

Tough-Tags are the pre-cut, peel-off, chemically inert labels which are sized to fit microcentrifuge tubes and other laboratory containers. Tough-Tags strongly adhere to all plastics and are designed to withstand steam-autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling or falling off. Tough-Tags are easy to use, simply mark the label with any writing instrument and press it onto the tube or container. The labels will not fall of even after shaking or vortexing. The labels are thin enough to slide easily in and out of centrifuge rotors without binding.
Supplied on a roll.

Choice of colours, select from drop down list.

* Autoclave Indication - Labels change from Green to Purple when exposed to autoclave temperatures.
* Tough - Chemically inert, polyester labels reists most organic solvents and caustic agents.
* Temperature Resistant - From -40°C to 121°C, Tough-Tags resists boiling water baths and freezer temperatures.
*Ideally sized - Fits a variety of microtubes, slides and other laboratory containers.

Tough-SpotsTM are chemically inert, polyvinyl labels that adhere to all plastics. Tough-Spots withstand boiling water baths, conventional and cryogenic freezer temperatures, most organic solvents, caustic agents and other challenges without peeling, becoming brittle or degrading. Tough-Spots will accept any writing instrument, just write, peel back the release paper and affix to the top of a microtube or flat top cryovial. Ideally used on 0.5-1.5ml tubes. Tough-Spots are useful for tagging a wide range of small containers in the research laboratory.
Provided on a roll.

Choice of colours.

Tough-SpotsTM are chemically inert, polyvinyl labels that adhere to all plastics. Tough-Spots withstand boiling water baths, conventional and cryogenic freezer temperatures, most organic solvents, caustic agents and other challenges without peeling, becoming brittle or degrading. Tough-Spots will accept any writing instrument, just write, peel back the release paper and affix to the top of a microtube or flat top cryovial. Ideally used on 0.5-1.5ml tubes. Tough-Spots are useful for tagging a wide range of small containers in the research laboratory.

Provided on a roll, 5000 labels per box.

Choice of all white or assorted colour pack containing 1000 labels of each colour - yellow, lavender, blue, green, red.

Select from drop down list.

Tough-SpotsTM are chemically inert, polyvinyl labels that adhere to all plastics. Tough-Spots withstand boiling water baths, conventional and cryogenic freezer temperatures, most organic solvents, caustic agents and other challenges without peeling, becoming brittle or degrading. Tough-Spots will accept any writing instrument, just write, peel back the release paper and affix to the top of a microtube or flat top cryovial. Ideally used on 1.5-2ml tubes. Tough-Spots are useful for tagging a wide range of small containers in the research laboratory.
Provided on a roll.

Provided on a roll.

Choice of colours, select from drop down list.

Provided on a roll.

Provided on a roll.

Labels to fit 1.5ml tubes. 500 sets per roll (a set is one spot and one rectangular tag label).

Choice of 5 colours, select from drop down list.

Cryo-Babies & Cryo-Tags withstand conventional & cryogenic storage (vapour & liquid phase nitrogen storage) to -196°C. The labels will also withstand boiling water baths to 100°C and dry heat up to 150°C. Polyolefin labels adhere to all plastics, glass & metals and resist detergents, oils solvents, caustic agents & other challenges without peeling or falling off.

Provided on a roll.

Provided on a roll.

Provided on a roll.

Ideally used for 1.5 to 2ml tubes.

1000 on a roll.

Choice of colours, select from drop down list.

Ideal Use: Oven-sterilization
Bake Tags are oven-safe marking labels that withstand conventional oven-sterilization (typically 180°C) or heating to inactivate RNase, DNase and other enzymes. Bake Tags will withstand autoclaving, cryogenic freezer storage conditions and boiling baths without peeling or falling off.

No Adhesive Residue - Label and adhesive completely dissolve in any water temperature in under 30 seconds

Environmentally Safe - 100% biodegradable and FDA Compliant for indirect food contact

Temperature-resistant - Storage at room temperature to moderate freezer temperatures

Laser Printable - Labels readily accept laser printing for quick and labeling of laboratory containers

Ideally Sized - Fits a variety of bottles, flasks, beakers and other laboratory containers

Withstands temperatures from -196C to 150C.
Ideally sized for 0.2ml tubes.
Can be marked with any fine point instrument.
Supplied on a roll.

Top-Loading - Easily insert new rolls or remove empty boxes.
Secure - Specially designed top rail holds rolls in place.
Cutting Edge - Allows easy liner trimmimg.
Convenient - When loaded, station can be used as a writing surface.
Also holds 5-Across Tough-Spots, Bake-Tags, Teeny Tough-tags and Sidewall Tough-Tags

For use with Tough Tags, Tough Spots and Cryo-Babies on a roll.
Holds up to 4 rolls at a time.
Measures 7" W x 5"D x 4"H (outer diameter)