Laboratory Products | Storage Solutions> Microplate Seals > Pierceable Seals

Pierceable SealsPierceable Seals

A range of piercable sealing films. Zone free films have adhesive free areas over each well. X-Pierce films have slits precut over each well allowing easy sample access by pipettes or robotic probes.

EZ Pierce, Non sterile, Non Printed (Pk100)
Price:£32.00 / €40.00
(Excl Vat)

quantity:

Ref: WTS-7029  
Designed for the sealing of microplates where well to well contamination and crossover is of critical concern. EZ Pierce is easily pierced to allow direct sample recovery with single and multichannel pipetted or robotic probes. No longer is there a need to peel back the film in order to access the well and risk aerosols and possible contamination or crossover.

EZ Pierce, Sterile, Non Printed (Pk50)
Price:£23.00 / €28.75
(Excl Vat)

quantity:

Ref: WTS-7030  

EZ Pierce, Non sterile, Printed (PK100)
Price:£35.00 / €43.75
(Excl Vat)

quantity:

Ref: WTS-7031  
Designed for the sealing of microplates where well to well contamination and crossover is of critical concern. EZ Pierce is easily pierced to allow direct sample recovery with single and multichannel pipetted or robotic probes. No longer is there a need to peel back the film in order to access the well and risk aerosols and possible contamination or crossover.

Printed 96 well template version flags each well with clearly marked alpha-numerics for easy well identification.

EZ Pierce Zone Free, Pk50, Non-Sterile
Price:£73.00 / €91.25
(Excl Vat)

quantity:

Ref: WTS-7032  
Zone-FreeTM films are unique double-layer films consisting of a clear, easily-pierceable, adhesive-free polyethylene film bonded to a 96-well-die-cut white adhesive polypropylene sublayer. This combination provides an adhesive-free zone over each well while ensuring a secure seal around the rim and between wells.

Designed for 96-well microplates where well-to-well contamination and crossover is of critical concern, the easy-piercing film allows for direct sample recovery with single and multi-channel pipettors or robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip or probe, ultimately minimizing the amount of adhesive that comes into contact with the sample.

EZ Pierce Zone Free, Pk 50, Sterile
Price:£84.00 / €105.00
(Excl Vat)

quantity:

Ref: WTS-7033  

EZ-Pierce, Printed, Sterile (Pk 50)
Price:£26.00 / €32.50
(Excl Vat)

quantity:

Ref: WTS-7043  

EZ Pierce, ColourTab (Pk 50)
Price:£29.00 / €36.25
(Excl Vat)

quantity:

Ref: WTS-7044  
Consists of easily pierceable 70µm thickness polyethylene with an acrylic adhesive. Piercing allows direct sample recovery with single or multichannel pipettors and robotic probes. These unique films include a printed 96 well alpha numeric template for easy well location and a colour dot and white writing area on each end tab for plate ID labelling. End tabs with backing removed adhere to the ends of the plate and are perforated so they can be left in place to maintain plate identity even if the centre portion of the film is removed.

EZ-Pierce ColourTab, Sterile (Pk 50)
Price:£35.00 / €43.75
(Excl Vat)

quantity:

Ref: WTS-7045  

X-Pierce Films, Non-Sterile, Pk100
Price:£56.00 / €70.00
(Excl Vat)

quantity:

Ref: WTS-7046  
Specifically for automation! Patented X-Pierce Fims have a thin adhesive layer and precut hairline "X" pattern over each well of a 96 well plate to allow easy penetration of probe or tip without adhesive fouling or occlusion. Flaps reseal after sampling to provide short term protection rom contamination and evaporation.

X Pierce Films, Sterile, Pk 50
Price:£36.00 / €45.00
(Excl Vat)

quantity:

Ref: WTS-7047  

Laboratory Products | Storage Solutions> Microplate Seals > Pierceable Seals